- Turn-Key Bolt-On Tuned Kit
- Satin Vortech V-3 Supercharger Unit
- Air/Water Intercooled
- Includes Tuning via UpRev w/Cable and Data Logging
- CARB Exempt - E.O. #D-436-20
- Fits RWD & AWD Models
STILLEN VQ37HR Supercharger Kit for the 2008-15 Infiniti G37 Coupe / Q60 - SATIN
- Increase Horsepower to 480-520HP (Flywheel) - typical output approximately 400WHP (380-450whp range)
- CARB EXEMPT EO# D-436-20
- 50 STATE LEGAL
- Includes Tune File, Tuner Cable and Datalogging Capability
- Air-water intercooler chills air charge at engine entry point
- FITS UNDER STOCK HOOD! No Hood Replacement Required
- Front-mounted compact heat exchanger maximizes cool air flow
- ŒæAvailable 3 year/36,000 Powertrain Warranty***
- Typically Installs in Approximately 12 Hours for Most Techs*
We're talking driveable horsepower too, suitable for daily drivers, canyon carvers and track days.
What does 'driveable' mean?Take an unsuspecting passenger for a low RPM cruise around town in your STILLEN supercharged Infiniti G37 Coupe / Q60. Keep a light touch on the gas pedal and they might be fooled into thinking there's a bone stock motor under the hood.
They won't suspect a thing....until you hit the town limit sign and crack the throttle wide open.
Scenery gets blurry-in-a-hurry as the centrifugal Vortech blower spins up to hyperspeed with a telltale hiss. The STILLEN designed and built intake manifold sucks in cubic yards of cool air. The remapped ECU fuel management module jacks the boosted fuel pump to inject the precise amount of high octane cocktail into the maelstrom.
Your right foot is orchestrating a symphony of controlled violence that delivers a linear, bottomless powerband. If you can peel your head off the headrest to sneak a glance at your passenger you'll see instant enlightenment and heavy G's at work.
A YEAR IN THE MAKING
You might think it all sounds like witchcraft. But there are no spells and potions involved in creating this enhanced driving experience. Designing this supercharger system for the G37 Coupe / Q60 involved precision engineering and innovative problem solving - a STILLEN specialty!
Much of the year-long development and testing process surrounded the ECU fuel management settings. STILLEN engineers remapped the ECU fuel management settings for the supercharger system to manage the improved airflow, operating temps and huge power gains, all while achieving 50 state emissions compliance**.
The complete supercharger kit includes larger injectors and a new fuel pump to match the remapped factory ECU.
A BULLETPROOF BUILDBy redesigning the intake manifold we were able to incorporate the intercooler inside the manifold, thus allowing us to cool the air charge immediately before the air enters the engine. Additionally, the front mounted heat exchanger does not block the airflow supplying cool air to other vital coolers such as the radiator, engine oil cooler, transmission cooler, power steering cooler or the A/C condenser. Because water is 4 times more efficient at dissipating heat than air, we are able to utilize a more compact heat exchanger to cool the water.
The V-3 features a self-contained oiling system and quiet V-belt design, with plenty of additional boost capability for those wanting even more power down the road.
STILLEN took extreme care in designing this system, ensuring that all additional coolers (oil, transmission, power steering, etc) would work with the intercooler system, as the Nissan VQ37 engine is prone to high oil temperatures unless properly cooled.
At all levels of development the system was tested, both for street drivability and reliability under normal traffic and freeway conditions. Stillen drivers flogged the test car at El Toro Air Base, with repeated 140+ mph runs and hard driving on tight courses with excessive revving and redlining. Testing included extensive monitoring of all pertinent air and fluid temperatures.
WITH CABLE OPTION
To tune these supercharger systems STILLEN works with UPRev software. This software requires a license and a cable to load the tune into the vehicle's ECU. The With Cable option is designed for customers who may not live near an UPrev certified tuner or for a dealership who is completing the installation. This is also a great solution for the DIY guy looking to install the kit in his garage.
WITHOUT CABLE OPTION
The "without cable" option is supplied with all of the hardware and the tune. This solution is good for someone who is working with an UPrev pro tuner that already has the licenses and loading cable in their facility. This way you don't need to pay extra for something you might already have access to. Either way, the tune is the same.
STRAIGHT FORWARD INSTALLATION
One of the hallmarks of a STILLEN supercharger is ease of installation. Much of the assembly of the kit is completed here at STILLEN before we pack and ship your supercharger. The main supercharger unit is pre-assembled to the laser-cut billet aluminum mounting brackets. Installation is very straight forward, including detailed step-by-step instructions. Typical install time for a competent shop is 12 hours.
WE'RE YOUR SUPERCHARGER EXPERTS
THE FINE PRINT*Individual results will vary depending on baseline condition of the stock engine, type of dynamometer used, temperature, elevation, fuel and various other factors. Typical results are around 400HP (wheel) at under 500' elevation and below 75 degrees F. Typical output range 380WHP - 450WHP, depending on level of modification, engine age/health, elevation/sea level and the weather that particular day.
**50-state compliance currently for 2008-13 model years. Call us or check individual product pages for model year updates.
***Certain conditions apply for warranty eligibility. Consult individual product pages or... CALL NOW Your STILLEN Speed, Performance and Style Counselor is standing by at 866-250-5542.
STILLEN is proud to offer our exclusive supercharger kit for the VQ37HR Infiniti G37 Coupe / Q60. Get yours today!
- choosing a selection results in a full page refresh